Many people think that a transformer ratio tester is just to measure the transformer ratio, and then put it away after use. Engineers who have truly used HZTTR80A know that the testing function of this instrument goes far beyond just one variable ratio value, covering almost the entire set of indica
Those who engage in electrical maintenance cannot avoid a common issue: before a cable is put into operation, it must undergo a voltage withstand test. However, for a high-voltage cable several kilometers long, with a capacitance of several hundredths of a microfarad, using traditional power frequen
Recently, a colleague asked me, "When buying a high-current booster, the salesperson quoted a bunch of parameters, such as rated current, measurement accuracy, waveform distortion... I don't know which one to focus on." This article will help you clarify the core logic of selection fro
I. Preparation and preliminary verification before testingBefore conducting the test, ensure that the harmonic detector has sufficient battery power and that the function settings are intact. Verify that the equipment calibration label is within its validity period. Record the basic information of t
Ultra-low frequency high voltage dielectric loss testing is a crucial method for evaluating the insulation aging status of power equipment such as high voltage cables, generators, and transformers. Its test results directly determine whether the equipment can be safely put into operation and the mai
中文
English
+86-312-6775656
+86 13731210226
sales03@bdhuazheng.com
